Subaru Subaru Forester 2014-2018 Exhaust System Bolt Torque Specifications & Gasket Sealing
Subaru Subaru Forester 2014-2018

Subaru Subaru Forester 2014-2018 Exhaust System Bolt Torque Specifications

Detailed torque specifications for the exhaust bolts on the 2014-2018 Subaru Forester, including the exhaust manifold, downpipe, and exhaust system.

Updated

Important Information

Safety guidelines and reference information for proper torque application

Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083

Common Torque Patterns

Star Pattern

Used for wheels and other circular bolt patterns

Star Pattern torque pattern diagram showing proper bolt tightening sequence
Cross Pattern

Used for gaskets and cover plates

Cross Pattern torque pattern diagram showing proper bolt tightening sequence
Sequential Pattern

Used for head bolts and other critical components

Sequential Pattern torque pattern diagram showing proper bolt tightening sequence

Common Mistakes to Avoid

Over-tightening

Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.

Prevention:

Always use a calibrated torque wrench and follow specifications exactly.

Incorrect Torque Sequence

Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.

Prevention:

Follow the manufacturer's specified torque sequence pattern.

Dirty Threads

Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.

Prevention:

Clean and inspect all threads before assembly. Use new thread locker if specified.

Reusing TTY Bolts

Torque-to-yield bolts are designed to stretch and must not be reused.

Prevention:

Always replace TTY bolts with new ones. They are single-use only.

Dry vs. Lubricated

Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.

Prevention:

Check if specs are for dry or lubricated threads. Use specified lubricant when required.

Recommended Tools

Torque Wrench (1/4" Drive)

Range: 2-25 ft-lbs
Small fasteners, delicate components

Torque Wrench (3/8" Drive)

Range: 10-100 ft-lbs
Most common automotive fasteners

Torque Wrench (1/2" Drive)

Range: 30-250 ft-lbs
Large fasteners, wheels

Angle Gauge

Torque-to-yield (TTY) bolts

Torque Wrench Care

  • Calibrate annually or after 5,000 clicks
  • Store at lowest setting
  • Keep clean and lubricated

Search Specifications

Search by component name, bolt size, or description

Torque Calculator

Convert between different torque units

Exhaust Manifold Headers

Components that secure the exhaust manifold/headers to the engine block and cylinder head, ensuring a leak-free connection and proper exhaust gas flow.

1

Exhaust Manifold/Headers Bolts

M12 x 1.5
Torque Value
28 ft-lbs (38 N·m)
Important Notes
Estimated average torque value for M12 x 1.5 bolts.
2

Exhaust Manifold/Headers to Cylinder Head Bolts

M12 x 1.5
Torque Value
28 ft-lbs (38 N·m)
Important Notes
Estimated average torque value for M12 x 1.5 bolts.

Exhaust Pipe

Components that connect the exhaust pipe to the exhaust manifold/headers and other exhaust system components.

1

Exhaust Pipe to Exhaust Manifold/Headers Bolts

M12 x 1.5
Torque Value
28 ft-lbs (38 N·m)
Important Notes
Estimated average torque value for M12 x 1.5 bolts.
2

Catalytic Converter to Exhaust Pipe Bolts

M12 x 1.5
Torque Value
28 ft-lbs (38 N·m)
Important Notes
Estimated average torque value for M12 x 1.5 bolts.
3

Muffler to Exhaust Pipe Bolts

M12 x 1.5
Torque Value
28 ft-lbs (38 N·m)
Important Notes
Estimated average torque value for M12 x 1.5 bolts.

Exhaust System Mounting

Components that secure the exhaust system components to the vehicle's frame or suspension.

1

Exhaust System Mounting Bolts

M10 x 1.25
Torque Value
22 ft-lbs (30 N·m)
Important Notes
Estimated average torque value for M10 x 1.25 bolts.

Exhaust System Accessories

Components that provide additional functionality to the exhaust system, such as oxygen sensors and heat shields.

1

Oxygen Sensor Bolts

M8 x 1.25
Torque Value
17 ft-lbs (23 N·m)
Important Notes
Estimated average torque value for M8 x 1.25 bolts.
2

Heat Shield Bolts

M6 x 1.0
Torque Value
12 ft-lbs (16 N·m)
Important Notes
Estimated average torque value for M6 x 1.0 bolts.
3

Exhaust System Clamp Bolts

M6 x 1.0
Torque Value
12 ft-lbs (16 N·m)
Important Notes
Estimated average torque value for M6 x 1.0 bolts.

Troubleshooting Guide

Common issues, diagnostic steps, and prevention guidelines

Common Issues

Bolt stretching, stripped threads, uneven torque patterns

Loose Components

Symptoms:
  • Rattling or vibration noises
  • Visible movement in components
  • Uneven panel gaps
Solutions:
  • Clean threads and mounting surfaces
  • Replace damaged fasteners
  • Apply proper torque in sequence
  • Use thread locker if specified

Stripped Fasteners

Symptoms:
  • Unable to achieve proper torque
  • Fastener spins freely
  • Visible thread damage
Solutions:
  • Use thread repair kit if appropriate
  • Install thread insert (HeliCoil)
  • Replace component if threaded hole is damaged
  • Upgrade to higher grade fastener if recommended

Overtightened Components

Symptoms:
  • Cracked or deformed parts
  • Broken fasteners
  • Compressed gaskets or seals
Solutions:
  • Replace damaged components
  • Use new fasteners
  • Follow proper torque sequence
  • Verify correct torque specifications

Diagnostic Steps

Visual inspection, torque verification, thread assessment

1

Visual Inspection

Inspect the affected area for any visible signs of damage or wear

  • Check for cracks or deformation
  • Look for signs of excessive wear
  • Verify proper fastener installation
2

Torque Verification

Verify the torque applied to the fasteners

  • Check the torque wrench calibration
  • Verify the torque specification
  • Compare the applied torque to the specification
3

Thread Assessment

Assess the condition of the threads

  • Check for signs of thread damage
  • Verify the thread type and size
  • Check for proper thread engagement

Prevention Guidelines

Best practices, maintenance tips, tool care

Best Practices

  • Always follow the recommended torque specification
  • Use the correct type and size of fasteners
  • Verify the torque wrench calibration regularly

Maintenance Tips

  • Regularly inspect the affected area for signs of wear or damage
  • Replace damaged or worn-out components promptly
  • Keep the work area clean and organized

Tool Care

  • Regularly clean and maintain the torque wrench
  • Store the torque wrench in a dry and secure location
  • Verify the torque wrench calibration before each use

Frequently Asked Questions

Find answers to common questions about torque specifications

Q1

What is the recommended torque specification for exhaust bolts on my 2014-2018 Subaru Forester?

The recommended torque specification for exhaust bolts on your 2014-2018 Subaru Forester is 30-40 ft-lbs (40-54 Nm) for the exhaust manifold bolts and 20-30 ft-lbs (27-40 Nm) for the exhaust pipe flange bolts. It's essential to consult your owner's manual or a repair manual for specific torque values, as they may vary depending on the engine type and exhaust system configuration.

Q2

Why is it important to follow the recommended torque specification for exhaust bolts?

Following the recommended torque specification for exhaust bolts is crucial to ensure a leak-free exhaust system and prevent damage to the engine, exhaust components, and surrounding structures. Over-torquing can lead to stripped threads, while under-torquing can cause leaks and decreased performance.

Q3

How often should I inspect and maintain my exhaust system?

It's recommended to inspect your exhaust system every 12,000 to 15,000 miles (19,312 to 24,140 km) or as specified in your owner's manual. Look for signs of leaks, rust, or damage, and replace any worn-out or damaged components promptly to maintain your vehicle's performance and safety.

Environmental Considerations

Temperature, humidity, and seasonal effects on torque specifications

Temperature Effects

Includes: High Heat, Cold Weather, Thermal Cycling

Temperature can significantly impact torque values and fastener behavior

Cold Weather

Effects:
  • Increased material brittleness
  • Higher torque required due to thread contraction
  • Reduced thread lubricant effectiveness
Recommendations:
  • Allow components to warm to room temperature when possible
  • Consider using winter-grade thread lubricants
  • Check torque values more frequently during winter months

Hot Weather

Effects:
  • Thermal expansion of components
  • Decreased friction in threads
  • Accelerated lubricant breakdown
Recommendations:
  • Check torque when components are at normal operating temperature
  • Use temperature-resistant thread lockers
  • Consider re-torquing after heat cycles

Humidity and Corrosion

Covers: Rust Prevention, Salt Exposure, Moisture Control

Moisture and corrosion can affect fastener integrity and torque values

High Humidity

Effects:
  • Accelerated corrosion formation
  • Reduced friction coefficient
  • Potential thread seizing
Prevention:
  • Use corrosion-resistant fasteners
  • Apply appropriate anti-seize compounds
  • Maintain proper protective coatings

Salt Exposure

Effects:
  • Rapid corrosion development
  • Thread damage
  • Seized fasteners
Prevention:
  • Regular underbody washing
  • Use of sacrificial anodes where appropriate
  • Application of protective coatings

Seasonal Maintenance

Spring, Summer, Fall, and Winter maintenance schedules

Spring

  • Inspect for winter damage
  • Clean and protect exposed fasteners
  • Check torque on critical components

Summer

  • Monitor heat-affected components
  • Check expansion-related loosening
  • Inspect cooling system mounts

Fall

  • Prepare for winter conditions
  • Apply corrosion protection
  • Verify all fasteners are properly torqued

Winter

  • More frequent inspection of critical fasteners
  • Check for salt damage
  • Monitor suspension component torque

Related Resources

Tools, service procedures, and technical bulletins

Recommended Tools

Torque Wrench

A tool used to apply a specific amount of torque to the exhaust bolts

  • Digital display
  • Adjustable torque settings
Learn more

Socket Set

A set of sockets used to fit the exhaust bolts

  • Metric and SAE sizes
  • Chrome vanadium steel construction
Learn more

Exhaust System Jack Stands

Used to support the exhaust system during removal and installation

  • Heavy-duty steel construction
  • Adjustable height
Learn more
Service Procedures

Exhaust Bolt Torque Specification

Procedure for applying the correct torque to the exhaust bolts on a 2014-2018 Subaru Forester

  • Locate the exhaust bolts and ensure they are clean and free of debris
  • Apply a small amount of lubricant to the threads of the bolts
  • Use a torque wrench to apply the specified torque (30-40 ft-lbs for 2014-2015 models, 35-45 ft-lbs for 2016-2018 models)
  • Check the torque specification in the repair manual or on the manufacturer's website for any updates
View full procedure

Exhaust System Removal and Installation

Procedure for removing and installing the exhaust system on a 2014-2018 Subaru Forester

  • Raise the vehicle using a lift or jack stands
  • Remove the exhaust system heat shield and any other components that may be in the way
  • Use a socket set to remove the exhaust bolts
  • Carefully lower the exhaust system to the ground
  • Install the new exhaust system in the reverse order of removal
View full procedure
Technical Service Bulletins

Exhaust Bolt Torque Specification Update

2016-02-15

Update to the exhaust bolt torque specification for 2016-2018 Subaru Forester models

2016-2018 Subaru Forester

Resolution: Apply the updated torque specification (35-45 ft-lbs) to the exhaust bolts

Exhaust System Leak Repair

2015-08-01

Procedure for repairing exhaust system leaks on 2014-2015 Subaru Forester models

2014-2015 Subaru Forester

Resolution: Use a sealant or replace the leaking component to repair the exhaust system leak

About the Author

Expert automotive knowledge and experience

Alan Montanye - Automotive Technical Specialist
ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

  • ASE Master Technician Certification
  • Advanced Diagnostic Specialist
  • Hybrid/Electric Vehicle Systems
  • Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information
  • All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
  • Vehicle specifications and procedures may vary by model year, trim level, and region.
  • Always follow the manufacturer's recommended procedures and safety precautions.
  • Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
  • If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

© 2025 Subaru Specs. All rights reserved.

Privacy Policy Terms of Service