Subaru Subaru Legacy 2010-2014 Body Specifications
Explore detailed body specifications for the 2010-2014 Subaru Legacy, including dimensions, weight, and materials. This guide is essential for maintenance, repairs, and upgrades, providing accurate technical data for mechanics and enthusiasts.
Overview Specifications
This document provides detailed specifications and information about the body design and features of the 2010-2014 Subaru Legacy. It is organized into sections covering exterior dimensions, materials, aerodynamics, and safety features. Use the search functionality to quickly locate specific details or navigate through the sections for a comprehensive understanding of the Legacy's body specifications.
How to Use
Use the search bar to enter keywords related to the body specifications you are looking for. Results will highlight relevant sections and subsections for easy access.
Scroll through the document or use the table of contents to jump to specific sections. Each section is divided into subsections with detailed technical points for easy reference.
Key Specifications
Length
186.4 inches
Width
71.7 inches
Height
59.3 inches
Wheelbase
108.3 inches
Drag Coefficient
0.29
Available Specifications
Exterior Dimensions
This section covers the overall dimensions of the 2010-2014 Subaru Legacy, including length, width, height, and wheelbase. It also includes details on ground clearance and weight distribution.
Exterior Dimensions
This section covers the overall dimensions of the 2010-2014 Subaru Legacy, including length, width, height, and wheelbase. It also includes details on ground clearance and weight distribution.
Overall Dimensions
- Length: 186.4 inches
- Width: 71.7 inches
- Height: 59.3 inches
- Wheelbase: 108.3 inches
- Ground Clearance: 6.5 inches
- Curb Weight: 3,395 lbs
Weight Distribution
- Front: 58%
- Rear: 42%
- Weight with Full Load: 4,000 lbs
- Payload Capacity: 1,000 lbs
Body Materials
This section details the materials used in the construction of the Subaru Legacy's body, including the type of steel, aluminum components, and corrosion-resistant coatings.
Body Materials
This section details the materials used in the construction of the Subaru Legacy's body, including the type of steel, aluminum components, and corrosion-resistant coatings.
Material Composition
- High-strength steel used in frame
- Aluminum hood for weight reduction
- Galvanized steel panels for rust resistance
- Plastic components for bumpers and trim
Corrosion Protection
- Electro-galvanized steel coating
- Anti-corrosion undercoating
- Rust-resistant paint layers
- Drainage channels to prevent water accumulation
Aerodynamics
This section explains the aerodynamic design features of the Subaru Legacy, including drag coefficient, airflow management, and exterior styling elements.
Aerodynamics
This section explains the aerodynamic design features of the Subaru Legacy, including drag coefficient, airflow management, and exterior styling elements.
Drag Coefficient
- Drag Coefficient (Cd): 0.29
- Smooth underbody design
- Aerodynamic side mirrors
- Rear spoiler for improved stability
Airflow Management
- Front grille designed for optimal airflow
- Air curtains to reduce turbulence
- Rear diffuser for smoother airflow
- Windshield wipers with aerodynamic design
Safety Features
This section highlights the safety features integrated into the body design of the Subaru Legacy, including crumple zones, reinforced pillars, and pedestrian protection.
Safety Features
This section highlights the safety features integrated into the body design of the Subaru Legacy, including crumple zones, reinforced pillars, and pedestrian protection.
Structural Safety
- Front and rear crumple zones
- Reinforced B-pillars for rollover protection
- High-strength roof structure
- Side-impact door beams
Pedestrian Protection
- Energy-absorbing hood design
- Deformable windshield wiper pivots
- Soft bumper materials
- Raised front bumper for impact dispersion
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Component Specifications
Overview
- Type
- Sedan/Wagon
- Configuration
- Unibody
- Platform
- Subaru Legacy Platform
- Material
- High-strength steel
- Location
- Front-engine, all-wheel drive
Dimensions
- Length
- 186.4 in (4735 mm)
- Width
- 71.7 in (1821 mm)
- Height
- 59.3 in (1506 mm)
- Wheelbase
- 108.3 in (2751 mm)
- Curb Weight
- 3450 lbs (1565 kg)
- Ground Clearance
- 6.1 in (155 mm)
- Trunk Capacity
- 14.7 cu ft (416 L)
Materials
- Frame
- High-strength steel with reinforced sections
- Body Panels
- Galvanized steel with corrosion-resistant coating
- Roof
- Lightweight aluminum
- Windows
- Laminated safety glass
- Bumpers
- Impact-resistant polypropylene
Features
- Exterior
-
- Aerodynamic design
- Integrated rear spoiler
- Chrome door handles
- LED taillights
- interior
-
- Leather-wrapped steering wheel
- Dual-zone climate control
- Power-adjustable driver's seat
- 60/40 split-folding rear seats
- Lighting
-
- HID headlights
- LED daytime running lights
- Fog lights
- Automatic headlight leveling
- Storage
-
- Center console storage
- Door pocket storage
- Rear seat armrest with cupholders
- Roof rails (Wagon)
- Convenience
-
- Keyless entry
- Power windows with auto-up/down
- Heated side mirrors
- Rain-sensing wipers
Safety Features
- Structural
-
- Ring-shaped reinforcement frame
- Front and rear crumple zones
- Side-impact door beams
- Airbags
-
- Dual front airbags
- Side curtain airbags
- Front seat-mounted side airbags
- Active Safety
-
- Vehicle Dynamics Control (VDC)
- Anti-lock Braking System (ABS)
- Electronic Brake-force Distribution (EBD)
- Passive Safety
-
- Whiplash-reducing front seats
- Child safety seat anchors
- Tire pressure monitoring system
Comfort Features
- Seating
-
- 10-way power-adjustable driver's seat
- Heated front seats
- Rear seat center armrest
- Climate
-
- Dual-zone automatic climate control
- Rear seat vents
- Air filtration system
- Noise Reduction
-
- Acoustic windshield
- Sound-deadening materials
- Sealant-filled body cavities
- Visibility
-
- Electrochromic rearview mirror
- Heated side mirrors
- Rear window defroster
Accessories
- Exterior
-
- Roof rack
- Rear bumper protector
- Mud flaps
- interior
-
- All-weather floor mats
- Cargo tray
- Seat back protectors
- Lighting
-
- LED interior lighting kit
- Fog light kit
- License plate LED lights
Maintenance
- Service interval
- Every 6,000 miles or 6 months
- Service Items
-
- Inspect and lubricate door hinges
- Check body panel alignment
- Inspect weather stripping
- Clean and condition leather seats
- Check and adjust headlight alignment
- Maintenance Notes
- Regular waxing recommended to protect paint finish
Warranty
- Basic
- Miles: 36,000Years: 3Coverage: Bumper-to-bumper
- Powertrain
- Miles: 60,000Years: 5Coverage: Engine and transmission
- Corrosion
- Miles: UnlimitedYears: 5Coverage: Perforation from corrosion
- Roadside Assistance
- Miles: 36,000Years: 3Coverage: 24-hour emergency services
Production Details
- Manufacturer
- Subaru Corporation
- Manufacturing Process
-
- Robotic welding
- Electrostatic painting
- Laser-guided assembly
- Quality Control
- inspection Stages: 12Testing: Water leak testing, Wind noise testing, Structural integrity testing
- Sustainability Practices
-
- Recycled materials in interior trim
- Water-based paints
- Energy-efficient manufacturing
- Production Metrics
- Units Per Day: 1200Defect Rate: 0.02%Production Time: 18 hours per vehicle
Service Information for body Service
Maintenance and service requirements specific to the body
- Inspect door hinges and lubricate if necessary
- Check body panel alignment
- Inspect weather stripping for wear
- Clean and condition leather seats
- Check headlight alignment
Regular cleaning recommended to maintain finish
- Inspect and clean sunroof drainage channels
- Check and adjust door latches
- Inspect underbody for damage
- Check and tighten all body fasteners
- Inspect and clean door seals
Special attention to areas prone to corrosion
- Full body inspection for alignment and gaps
- Check and replace worn weather stripping
- Inspect and repair any paint chips
- Check and adjust all exterior lighting
- Inspect and clean all drainage channels
Professional detailing recommended for paint preservation
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What are the technical specifications for the 2010-2014 Subaru Legacy?
What are the technical specifications for the 2010-2014 Subaru Legacy?
The 2010-2014 Subaru Legacy features a 2.5L 4-cylinder or 3.6L 6-cylinder engine, producing 170-256 horsepower. It comes with a 6-speed manual or CVT transmission. The vehicle supports AWD, has a fuel capacity of 18.5 gallons, and offers a towing capacity of up to 3,000 lbs. It is compatible with 91-octane fuel and requires 5W-30 synthetic oil. Dimensions include a wheelbase of 108.3 inches and a curb weight of 3,395-3,615 lbs.
Q2 What are the maintenance requirements for the 2010-2014 Subaru Legacy?
What are the maintenance requirements for the 2010-2014 Subaru Legacy?
The 2010-2014 Subaru Legacy requires oil changes every 6,000 miles or 6 months, tire rotations every 7,500 miles, and brake inspections every 15,000 miles. The air filter should be replaced every 30,000 miles, and the spark plugs every 60,000 miles. Regular checks of the CVT fluid, coolant, and brake fluid are recommended. Adhering to the maintenance schedule ensures optimal performance and longevity.
Q3 How do I replace the headlights on a 2010-2014 Subaru Legacy?
How do I replace the headlights on a 2010-2014 Subaru Legacy?
To replace the headlights on a 2010-2014 Subaru Legacy, first, open the hood and locate the headlight assembly. Remove the electrical connector by pressing the release tab. Twist the bulb holder counterclockwise to remove it. Replace the old bulb with a new one, ensuring not to touch the glass. Reinsert the holder, reconnect the electrical connector, and test the headlights before closing the hood.
Q4 What should I do if my 2010-2014 Subaru Legacy's check engine light is on?
What should I do if my 2010-2014 Subaru Legacy's check engine light is on?
If the check engine light is on, first check the gas cap to ensure it is tight. If the light persists, use an OBD-II scanner to read the error code. Common issues include oxygen sensor failure, catalytic converter problems, or loose wiring. Address the specific issue or consult a mechanic for further diagnosis and repair. Ignoring the light may lead to more severe engine damage.
Q5 How can I optimize the performance of my 2010-2014 Subaru Legacy?
How can I optimize the performance of my 2010-2014 Subaru Legacy?
To optimize performance, use high-quality synthetic oil and premium fuel. Regularly check and maintain tire pressure, replace air filters, and ensure the CVT fluid is at the correct level. Upgrade to performance tires and consider installing a cold air intake or aftermarket exhaust system for improved airflow. Regular alignment and suspension checks also enhance handling and fuel efficiency.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
2010-2014 Subaru Legacy Service Manual
Coming SoonComprehensive guide covering maintenance, repairs, and technical specifications for the 2010-2014 Subaru Legacy.
Subaru Technical Service Bulletin 12-163-14
Coming SoonAddresses common CVT issues and provides updates for the 2010-2014 Subaru Legacy transmission system.
Subaru Legacy Parts and Accessories Catalog
Coming SoonDetailed catalog of OEM parts and accessories for the 2010-2014 Subaru Legacy, including compatibility information.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.