Subaru Subaru WRX 2014-2021 Body Specifications
Explore the detailed body specifications of the 2014-2021 Subaru WRX, including dimensions, materials, and structural components. This guide is essential for maintenance, repairs, and performance upgrades.
Overview Specifications
This document provides detailed specifications and information about the body design and features of the 2014-2021 Subaru WRX. It is organized into sections covering exterior dimensions, materials, aerodynamics, and safety features. Use the search functionality to quickly locate specific details or navigate through the sections for a comprehensive understanding of the WRX's body design.
How to Use
Use the search bar to enter keywords related to specific body features or specifications. Results will highlight relevant sections and subsections for quick access.
Scroll through the document or use the table of contents to jump to specific sections. Each section is divided into subsections with detailed technical points for easy reference.
Key Specifications
Length
180.9 inches
Width
70.7 inches
Height
58.1 inches
Wheelbase
104.3 inches
Curb Weight
3,267 lbs
Available Specifications
Exterior Dimensions
This section covers the overall dimensions of the 2014-2021 Subaru WRX, including length, width, height, and wheelbase. It also includes details on ground clearance and weight distribution.
Exterior Dimensions
This section covers the overall dimensions of the 2014-2021 Subaru WRX, including length, width, height, and wheelbase. It also includes details on ground clearance and weight distribution.
Overall Dimensions
- Length: 180.9 inches
- Width: 70.7 inches
- Height: 58.1 inches
- Wheelbase: 104.3 inches
- Ground Clearance: 4.9 inches
- Curb Weight: 3,267 lbs
Weight Distribution
- Front-to-Rear Ratio: 59:41
- Weight with Full Tank: 3,400 lbs
- Payload Capacity: 900 lbs
- Towing Capacity: Not recommended
Body Materials
This section details the materials used in the construction of the WRX's body, including the chassis, panels, and reinforcements. It highlights the use of lightweight and durable materials for enhanced performance.
Body Materials
This section details the materials used in the construction of the WRX's body, including the chassis, panels, and reinforcements. It highlights the use of lightweight and durable materials for enhanced performance.
Chassis Construction
- High-strength steel unibody frame
- Reinforced front and rear subframes
- Aluminum hood for weight reduction
- Galvanized steel panels for corrosion resistance
Reinforcements
- Ring-shaped reinforcement for crash safety
- Front and rear crumple zones
- Side-impact door beams
- Reinforced roof structure
Aerodynamics
This section explores the aerodynamic design features of the WRX, including its drag coefficient, spoiler, and underbody panels. These elements contribute to improved stability and fuel efficiency.
Aerodynamics
This section explores the aerodynamic design features of the WRX, including its drag coefficient, spoiler, and underbody panels. These elements contribute to improved stability and fuel efficiency.
Drag Coefficient
- Drag Coefficient (Cd): 0.33
- Front air dam for reduced lift
- Rear spoiler for downforce
- Smooth underbody panels
Airflow Management
- Functional hood scoop for intercooler airflow
- Side mirrors designed to reduce turbulence
- Rear diffuser for improved airflow
- Windshield wiper integration for reduced drag
Safety Features
This section outlines the safety features integrated into the WRX's body design, including crash protection, airbags, and advanced driver-assistance systems.
Safety Features
This section outlines the safety features integrated into the WRX's body design, including crash protection, airbags, and advanced driver-assistance systems.
Crash Protection
- Ring-shaped reinforcement frame
- Front and rear crumple zones
- Side-impact door beams
- Reinforced roof structure
Airbag System
- Dual front airbags
- Side curtain airbags
- Front seat-mounted side airbags
- Knee airbags for driver
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Component Specifications
Overview
- Type
- Sedan/5-door hatchback
- Configuration
- Unibody construction
- Platform
- Subaru Global Platform
- Material
- High-strength steel
- Location
- Ota, Gunma, Japan
Dimensions
- Length
- 180.9 in (4595 mm)
- Width
- 70.7 in (1796 mm)
- Height
- 58.1 in (1475 mm)
- Wheelbase
- 104.3 in (2649 mm)
- Curb Weight
- 3296 lbs (1495 kg)
- Ground Clearance
- 4.9 in (124 mm)
- Trunk Capacity
- 12.0 cu ft (340 L)
Materials
- Frame
- High-strength steel with reinforced joints
- Body Panels
- Galvanized steel with corrosion-resistant coating
- Roof
- Lightweight aluminum
- Windshield
- Laminated safety glass with UV protection
- Doors
- Steel with side-impact beams
Features
- Exterior
-
- Aerodynamic design with hood scoop
- LED headlights with automatic leveling
- Rear spoiler (STI models)
- Dual exhaust system
- interior
-
- Sport bucket seats
- Leather-wrapped steering wheel
- 60/40 split-folding rear seats
- Dual-zone automatic climate control
- Lighting
-
- LED daytime running lights
- LED taillights
- Fog lights
- Automatic headlights
- Windows
-
- Power windows with one-touch up/down
- Heated side mirrors
- Rain-sensing windshield wipers
- UV-reducing glass
- Storage
-
- Center console with armrest
- Door pocket storage
- Cup holders
- Glove compartment
Safety Features
- Structural
-
- Ring-shaped reinforcement frame
- Front and rear crumple zones
- Side-impact door beams
- Airbags
-
- Dual front airbags
- Side curtain airbags
- Front seat-mounted side airbags
- Active Safety
-
- Vehicle Dynamics Control (VDC)
- Anti-lock Braking System (ABS)
- Electronic Brake-force Distribution (EBD)
Comfort Features
- Seating
-
- 8-way power adjustable driver's seat
- Heated front seats
- Height-adjustable headrests
- Climate
-
- Dual-zone automatic climate control
- Rear seat air vents
- Cabin air filter
- Noise Reduction
-
- Acoustic windshield
- Sound-deadening materials
- Sealant-filled body cavities
Accessories
- Exterior
-
- Rear spoiler
- Body side molding
- Door edge guards
- interior
-
- All-weather floor mats
- Cargo tray
- Seat back protectors
- Protection
-
- Paint protection film
- Mud flaps
- Window deflectors
Maintenance
- Service interval
- Every 6,000 miles or 6 months
- Items
-
- Body inspection for rust or damage
- Door hinge lubrication
- Seal and weatherstrip conditioning
- Paint protection and waxing
- Underbody cleaning and rust prevention
- Notes
- Regular washing recommended to prevent corrosion, especially in winter climates
Warranty
- Basic
- Years: 3Miles: 36000Coverage: Bumper-to-bumper
- Powertrain
- Years: 5Miles: 60000Coverage: Engine, transmission, drivetrain
- Corrosion
- Years: 5Miles: UnlimitedCoverage: Perforation from corrosion
- Roadside Assistance
- Years: 3Miles: 36000Coverage: 24/7 emergency services
Production Details
- Manufacturer
- Subaru Corporation
- Manufacturing Process
-
- Robotic welding
- Electro-deposition coating
- Automated assembly
- Quality Control
- inspection Stages: 12Testing: Crash testing, Water leakage testing, Wind noise testing
- Sustainability Practices
-
- Recycled materials in production
- Water-based paints
- Energy-efficient manufacturing
- Production Metrics
- Annual Capacity: 200000Production Time: 18Units Per Day: 800
Service Information for body Service
Maintenance and service requirements specific to the body
- Inspect body for damage or corrosion
- Check door and trunk seals
- Lubricate door hinges and locks
- Clean and condition weatherstrips
- Inspect underbody for damage
Pay special attention to areas prone to stone chips and road salt accumulation
- Full body wash and wax
- Underbody cleaning and rust prevention
- Inspect and clean drainage channels
- Check alignment of body panels
- Inspect paint for fading or damage
Use only manufacturer-approved cleaning products to maintain protective coatings
- Comprehensive body inspection
- Replace worn weatherstrips
- Reapply rust protection coating
- Check and adjust panel gaps
- Inspect and repair paint chips
Consider professional detailing to maintain paint finish and protective coatings
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What are the key technical specifications for the 2014-2021 Subaru WRX?
What are the key technical specifications for the 2014-2021 Subaru WRX?
The 2014-2021 Subaru WRX features a 2.0L or 2.5L turbocharged flat-4 engine, producing 268-310 horsepower and 258-290 lb-ft of torque. It comes with a 6-speed manual or CVT transmission, all-wheel drive, and a curb weight of 3,267-3,454 lbs. The car has a fuel economy of 21-27 mpg and supports 17-18-inch wheels. Compatibility includes standard 5x114.3 bolt patterns and Subaru's EyeSight driver-assist system (2018+ models).
Q2 What maintenance is required for the 2014-2021 Subaru WRX?
What maintenance is required for the 2014-2021 Subaru WRX?
The 2014-2021 Subaru WRX requires regular maintenance, including oil changes every 6,000 miles, tire rotations every 7,500 miles, and brake inspections every 12,000 miles. The air filter should be replaced every 30,000 miles, and the spark plugs every 60,000 miles. Subaru recommends checking the all-wheel-drive system and replacing the timing belt (if applicable) at 100,000 miles. Always refer to the owner's manual for specific intervals.
Q3 How do I replace the headlights on a 2014-2021 Subaru WRX?
How do I replace the headlights on a 2014-2021 Subaru WRX?
To replace the headlights on a 2014-2021 Subaru WRX, first, disconnect the battery. Open the hood and locate the headlight assembly. Remove the retaining clips or screws holding the assembly in place. Disconnect the wiring harness and carefully remove the old bulb. Insert the new bulb without touching the glass, reconnect the harness, and secure the assembly. Reconnect the battery and test the lights.
Q4 What should I do if my Subaru WRX's check engine light comes on?
What should I do if my Subaru WRX's check engine light comes on?
If the check engine light comes on, first check the gas cap to ensure it's tight. If the light persists, use an OBD-II scanner to read the error code. Common issues include faulty oxygen sensors, loose wiring, or a failing catalytic converter. For specific codes, consult the owner's manual or a certified Subaru technician. Avoid ignoring the light, as it may indicate serious engine or emissions problems.
Q5 How can I optimize the performance of my 2014-2021 Subaru WRX?
How can I optimize the performance of my 2014-2021 Subaru WRX?
To optimize performance, consider upgrading the air intake and exhaust systems for better airflow. Install a performance tune to enhance engine output. Use high-quality synthetic oil and premium fuel. Regularly inspect and replace worn suspension components. For track use, upgrade to performance brake pads and tires. Always ensure modifications are compatible with your vehicle's warranty and local regulations.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
2014-2021 Subaru WRX Service Manual
Coming SoonComprehensive guide covering maintenance, repairs, and technical specifications for the 2014-2021 Subaru WRX.
Subaru Technical Service Bulletin (TSB) for WRX
Coming SoonOfficial updates and fixes for known issues in the 2014-2021 Subaru WRX, provided by Subaru.
Subaru WRX Parts and Accessories Catalog
Coming SoonDetailed catalog of OEM and aftermarket parts and accessories for the 2014-2021 Subaru WRX.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.