Subaru Vehicle Models Subaru Impreza 1992-2000
Subaru Vehicle Models Subaru Impreza 1992-2000 Torque Specifications
Complete Subaru Vehicle Models Subaru Impreza 1992-2000 torque specifications guide. Includes factory-specified torque values, torque sequences, and technical specifications for all components including body, brakes, drivetrain, electrical, emissions sensors, fuel, exhaust, HVAC, and suspension. Essential information for proper assembly and maintenance.
Updated
Important Information
Safety guidelines and reference information for proper torque application
Safety First
- Always verify torque specifications with your vehicle's factory service manual
- Use properly calibrated torque wrenches
- Replace all torque-to-yield (TTY) bolts - they are single-use only
- When in doubt, consult a professional mechanic
Quick Reference Guide
Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083
Common Torque Patterns
Star Pattern
Used for wheels and other circular bolt patterns
Cross Pattern
Used for gaskets and cover plates
Sequential Pattern
Used for head bolts and other critical components
Common Mistakes to Avoid
Common Mistakes to Avoid
Over-tightening
Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.
Prevention:
Always use a calibrated torque wrench and follow specifications exactly.
Incorrect Torque Sequence
Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.
Prevention:
Follow the manufacturer's specified torque sequence pattern.
Dirty Threads
Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.
Prevention:
Clean and inspect all threads before assembly. Use new thread locker if specified.
Reusing TTY Bolts
Torque-to-yield bolts are designed to stretch and must not be reused.
Prevention:
Always replace TTY bolts with new ones. They are single-use only.
Dry vs. Lubricated
Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.
Prevention:
Check if specs are for dry or lubricated threads. Use specified lubricant when required.
Recommended Tools
Recommended Tools
Torque Wrench (1/4" Drive)
Range: 2-25 ft-lbs
Small fasteners, delicate components
Torque Wrench (3/8" Drive)
Range: 10-100 ft-lbs
Most common automotive fasteners
Torque Wrench (1/2" Drive)
Range: 30-250 ft-lbs
Large fasteners, wheels
Angle Gauge
Torque-to-yield (TTY) bolts
Torque Wrench Care
- Calibrate annually or after 5,000 clicks
- Store at lowest setting
- Keep clean and lubricated
Search Specifications
Search by component name, bolt size, or description
Type to search through torque specifications. Use arrow keys to navigate results. Press Enter to select a result.
Torque Calculator
Convert between different torque units
1.6l H4 Engine
Torque specifications for 1.6L-H4 Engine
1.6l H4 Engine
Torque specifications for 1.6L-H4 Engine
Cylinder Head and Engine Block
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
25.5 ft-lbs (34.6 N·m)
Important Notes
Estimated value, actual value may vary depending on engine and application.
2 Cylinder Head Studs
M10 x 1.25
2
Cylinder Head Studs
M10 x 1.25
Torque Specification
35 ft-lbs (47.4 N·m)
Important Notes
Estimated value, actual value may vary depending on engine and application.
Main Bearings and Crankshaft
1 Main Bearing Bolts
M14 x 1.5
1
Main Bearing Bolts
M14 x 1.5
Torque Specification
52.5 ft-lbs (71.2 N·m)
2 Crankshaft Pulley/Harmonic Balancer Bolt
M16 x 1.5
2
Crankshaft Pulley/Harmonic Balancer Bolt
M16 x 1.5
Torque Specification
94 ft-lbs (127.4 N·m)
Valvetrain and Timing System
1 Camshaft Sprocket Bolt
M12 x 1.25
1
Camshaft Sprocket Bolt
M12 x 1.25
Torque Specification
46.5 ft-lbs (63 N·m)
2 Timing Belt/Chain Tensioner Bolt
M10 x 1.25
2
Timing Belt/Chain Tensioner Bolt
M10 x 1.25
Torque Specification
23.5 ft-lbs (31.9 N·m)
Engine Mounts and Oil Pan
1 Engine Mounting Bolts
M12 x 1.5
1
Engine Mounting Bolts
M12 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated value, actual value may vary depending on engine and application.
2 Oil Pan Bolts
M8 x 1.25
2
Oil Pan Bolts
M8 x 1.25
Torque Specification
4.5 ft-lbs (6.1 N·m)
Fuel and Ignition System
1 Fuel Injector Bolts
M8 x 1.25
1
Fuel Injector Bolts
M8 x 1.25
Torque Specification
14 ft-lbs (19 N·m)
2 Spark Plugs
M14 x 1.25
2
Spark Plugs
M14 x 1.25
Torque Specification
18 ft-lbs (24.4 N·m)
1.8l H4 Engine
Torque specifications for 1.8L-H4 Engine
1.8l H4 Engine
Torque specifications for 1.8L-H4 Engine
Engine Block and Cylinder Head
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
25.5 ft-lbs (34.5 N·m)
Important Notes
Estimated average value from 22-29 ft-lbs (30-40 Nm) range.
2 Cylinder Head to Engine Block Studs
M14 x 1.5
2
Cylinder Head to Engine Block Studs
M14 x 1.5
Torque Specification
35 ft-lbs (47.5 N·m)
Important Notes
Estimated average value from 30-40 ft-lbs (41-54 Nm) range.
Engine Mounts and Transmission
1 Engine Mounting Bolts
M16 x 1.5
1
Engine Mounting Bolts
M16 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated average value from 40-50 ft-lbs (54-68 Nm) range.
2 Engine Block to Transmission Bolts
M14 x 1.5
2
Engine Block to Transmission Bolts
M14 x 1.5
Torque Specification
35 ft-lbs (47.5 N·m)
Important Notes
Estimated average value from 30-40 ft-lbs (41-54 Nm) range.
Crankshaft and Camshaft
1 Main Bearing Bolts
M18 x 1.5
1
Main Bearing Bolts
M18 x 1.5
Torque Specification
52.5 ft-lbs (71.25 N·m)
Important Notes
Estimated average value from 50-55 ft-lbs (68-75 Nm) range.
2 Crankshaft Pulley/Harmonic Balancer Bolt
M20 x 1.5
2
Crankshaft Pulley/Harmonic Balancer Bolt
M20 x 1.5
Torque Specification
94 ft-lbs (127.5 N·m)
Important Notes
Estimated average value from 87-101 ft-lbs (118-137 Nm) range.
3 Camshaft Sprocket Bolt
M16 x 1.5
3
Camshaft Sprocket Bolt
M16 x 1.5
Torque Specification
46.5 ft-lbs (63 N·m)
Important Notes
Estimated average value from 43-50 ft-lbs (58-68 Nm) range.
Valvetrain and Intake/Exhaust
1 Valve Cover Bolts
M10 x 1.5
1
Valve Cover Bolts
M10 x 1.5
Torque Specification
4 ft-lbs (5.5 N·m)
Important Notes
Estimated average value from 3-5 ft-lbs (4-7 Nm) range.
2 Intake Manifold Bolts
M12 x 1.5
2
Intake Manifold Bolts
M12 x 1.5
Torque Specification
14 ft-lbs (19 N·m)
Important Notes
Estimated average value from 13-15 ft-lbs (18-20 Nm) range.
3 Exhaust Manifold/Headers Bolts
M12 x 1.5
3
Exhaust Manifold/Headers Bolts
M12 x 1.5
Torque Specification
25.5 ft-lbs (34.5 N·m)
Important Notes
Estimated average value from 22-29 ft-lbs (30-40 Nm) range.
Accessories and Sensors
1 Crankshaft Position Sensor Bolt
M8 x 1.25
1
Crankshaft Position Sensor Bolt
M8 x 1.25
Torque Specification
12.5 ft-lbs (17 N·m)
Important Notes
Estimated average value from 10-15 ft-lbs (14-20 Nm) range.
2 Camshaft Position Sensor Bolt
M8 x 1.25
2
Camshaft Position Sensor Bolt
M8 x 1.25
Torque Specification
12.5 ft-lbs (17 N·m)
Important Notes
Estimated average value from 10-15 ft-lbs (14-20 Nm) range.
3 Water Pump Bolts
M10 x 1.5
3
Water Pump Bolts
M10 x 1.5
Torque Specification
15 ft-lbs (20.25 N·m)
Important Notes
Estimated average value from 14-16 ft-lbs (19-22 Nm) range.
2.0l H4 Engine
Torque specifications for 2.0L-H4 Engine
2.0l H4 Engine
Torque specifications for 2.0L-H4 Engine
Cylinder Head
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
22 ft-lbs (30 N·m)
Important Notes
Torque value range: 22-29 ft-lbs (30-40 Nm)
2 Engine Block to Cylinder Head Dowel Pins
M8 x 1.25
2
Engine Block to Cylinder Head Dowel Pins
M8 x 1.25
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated torque value range: 10-15 ft-lbs (14-20 Nm)
Main Bearing
1 Main Bearing Bolts
M14 x 1.5
1
Main Bearing Bolts
M14 x 1.5
Torque Specification
52 ft-lbs (71 N·m)
Important Notes
Torque value range: 50-55 ft-lbs (68-75 Nm)
Connecting Rod
1 Connecting Rod Nuts
M12 x 1.5
1
Connecting Rod Nuts
M12 x 1.5
Torque Specification
31 ft-lbs (42 N·m)
Important Notes
Torque value range: 29-33 ft-lbs (40-45 Nm)
Flywheel
1 Flywheel Bolts
M14 x 1.5
1
Flywheel Bolts
M14 x 1.5
Torque Specification
62 ft-lbs (84 N·m)
Important Notes
Torque value range: 58-65 ft-lbs (78-88 Nm)
Oil Pan
1 Oil Pan Bolts
M10 x 1.25
1
Oil Pan Bolts
M10 x 1.25
Torque Specification
4 ft-lbs (6 N·m)
Important Notes
Torque value range: 4-5 ft-lbs (6-7 Nm)
Valve Cover
1 Valve Cover Bolts
M8 x 1.25
1
Valve Cover Bolts
M8 x 1.25
Torque Specification
4 ft-lbs (6 N·m)
Important Notes
Torque value range: 3-5 ft-lbs (4-7 Nm)
Timing Belt Chain
1 Timing Belt/Chain Tensioner Bolt
M12 x 1.5
1
Timing Belt/Chain Tensioner Bolt
M12 x 1.5
Torque Specification
24 ft-lbs (33 N·m)
Important Notes
Torque value range: 20-27 ft-lbs (27-37 Nm)
Camshaft
1 Camshaft Sprocket Bolt
M14 x 1.5
1
Camshaft Sprocket Bolt
M14 x 1.5
Torque Specification
47 ft-lbs (64 N·m)
Important Notes
Torque value range: 43-50 ft-lbs (58-68 Nm)
Crankshaft
1 Crankshaft Pulley/Harmonic Balancer Bolt
M16 x 1.5
1
Crankshaft Pulley/Harmonic Balancer Bolt
M16 x 1.5
Torque Specification
94 ft-lbs (127 N·m)
Important Notes
Torque value range: 87-101 ft-lbs (118-137 Nm)
Spark Plugs
1 Spark Plugs
M14 x 1.25
1
Spark Plugs
M14 x 1.25
Torque Specification
18 ft-lbs (24 N·m)
Important Notes
Torque value range: 14-22 ft-lbs (20-30 Nm)
Rocker Arms Shafts
1 Rocker Arms/Shafts Bolts
M10 x 1.25
1
Rocker Arms/Shafts Bolts
M10 x 1.25
Torque Specification
16 ft-lbs (22 N·m)
Important Notes
Torque value range: 15-17 ft-lbs (20-23 Nm)
Water Pump
1 Water Pump Bolts
M10 x 1.25
1
Water Pump Bolts
M10 x 1.25
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Torque value range: 14-16 ft-lbs (19-22 Nm)
Thermostat Housing
1 Thermostat Housing Bolts
M8 x 1.25
1
Thermostat Housing Bolts
M8 x 1.25
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Torque value range: 7-9 ft-lbs (9-12 Nm)
Oil Filter Housing
1 Oil Filter Housing Bolt
M12 x 1.5
1
Oil Filter Housing Bolt
M12 x 1.5
Torque Specification
16 ft-lbs (22 N·m)
Important Notes
Torque value range: 13-18 ft-lbs (18-25 Nm)
Oil Drain Plug
1 Oil Drain Plug Bolt
M12 x 1.5
1
Oil Drain Plug Bolt
M12 x 1.5
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Torque value range: 22-29 ft-lbs (30-40 Nm)
Crankshaft Position Sensor
1 Crankshaft Position Sensor Bolt
M8 x 1.25
1
Crankshaft Position Sensor Bolt
M8 x 1.25
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated torque value range: 10-15 ft-lbs (14-20 Nm)
Camshaft Position Sensor
1 Camshaft Position Sensor Bolt
M8 x 1.25
1
Camshaft Position Sensor Bolt
M8 x 1.25
Torque Specification
12 ft-lbs (16 N·m)
Important Notes
Estimated torque value range: 10-15 ft-lbs (14-20 Nm)
Engine Mounting
1 Engine Mounting Bolts
M14 x 1.5
1
Engine Mounting Bolts
M14 x 1.5
Torque Specification
45 ft-lbs (61 N·m)
Important Notes
Estimated torque value range: 40-50 ft-lbs (54-68 Nm)
2.2l H4 Engine
Torque specifications for 2.2L-H4 Engine
2.2l H4 Engine
Torque specifications for 2.2L-H4 Engine
Cylinder Head and Valvetrain
1 Cylinder Head Bolts
M12 x 1.5
1
Cylinder Head Bolts
M12 x 1.5
Torque Specification
22 ft-lbs (30 N·m)
2 Valve Cover Bolts
M8 x 1.25
2
Valve Cover Bolts
M8 x 1.25
Torque Specification
3 ft-lbs (4 N·m)
3 Rocker Arms/Shafts Bolts
M10 x 1.5
3
Rocker Arms/Shafts Bolts
M10 x 1.5
Torque Specification
15 ft-lbs (20 N·m)
Engine Block and Bearings
1 Main Bearing Bolts
M14 x 2.0
1
Main Bearing Bolts
M14 x 2.0
Torque Specification
50 ft-lbs (68 N·m)
2 Connecting Rod Nuts
M12 x 1.5
2
Connecting Rod Nuts
M12 x 1.5
Torque Specification
29 ft-lbs (40 N·m)
Crankshaft and Pulley
1 Flywheel Bolts
M14 x 2.0
1
Flywheel Bolts
M14 x 2.0
Torque Specification
58 ft-lbs (78 N·m)
2 Crankshaft Pulley/Harmonic Balancer Bolt
M16 x 2.0
2
Crankshaft Pulley/Harmonic Balancer Bolt
M16 x 2.0
Torque Specification
87 ft-lbs (118 N·m)
Timing and Accessory Components
1 Timing Belt/Chain Tensioner Bolt
M12 x 1.5
1
Timing Belt/Chain Tensioner Bolt
M12 x 1.5
Torque Specification
20 ft-lbs (27 N·m)
2 Camshaft Sprocket Bolt
M14 x 2.0
2
Camshaft Sprocket Bolt
M14 x 2.0
Torque Specification
43 ft-lbs (58 N·m)
Engine Mounting and Accessories
1 Engine Mounting Bolts
M14 x 2.0
1
Engine Mounting Bolts
M14 x 2.0
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Estimated value based on general industry standards.
2 Oil Pan Bolts
M10 x 1.5
2
Oil Pan Bolts
M10 x 1.5
Torque Specification
4 ft-lbs (6 N·m)
Intake and Exhaust Components
1 Intake Manifold Bolts
M10 x 1.5
1
Intake Manifold Bolts
M10 x 1.5
Torque Specification
13 ft-lbs (18 N·m)
2 Exhaust Manifold/Headers Bolts
M12 x 1.5
2
Exhaust Manifold/Headers Bolts
M12 x 1.5
Torque Specification
22 ft-lbs (30 N·m)
Fuel and Ignition Components
1 Fuel Rail Bolts
M10 x 1.5
1
Fuel Rail Bolts
M10 x 1.5
Torque Specification
14 ft-lbs (19 N·m)
2 Fuel Injector Bolts
M8 x 1.25
2
Fuel Injector Bolts
M8 x 1.25
Torque Specification
13 ft-lbs (18 N·m)
3 Ignition Coil Bolt
M8 x 1.25
3
Ignition Coil Bolt
M8 x 1.25
Torque Specification
6 ft-lbs (8 N·m)
4eat Transmission
Torque specifications for 4eat Transmission
4eat Transmission
Torque specifications for 4eat Transmission
Transmission Mounting
1 Transmission Mounting Bolts
M14 x 1.5
1
Transmission Mounting Bolts
M14 x 1.5
Torque Specification
50.5 ft-lbs (68.5 N·m)
Important Notes
Estimated value based on similar components and bolt sizes.
Transmission Oil System
1 Transmission Oil Pan Bolts
M10 x 1.25
1
Transmission Oil Pan Bolts
M10 x 1.25
Torque Specification
4.5 ft-lbs (6.1 N·m)
2 Transmission Drain and Fill Plugs
M12 x 1.5
2
Transmission Drain and Fill Plugs
M12 x 1.5
Torque Specification
32.5 ft-lbs (44 N·m)
Transmission Case and Valve Body
1 4EAT Transmission Case Bolts
M12 x 1.5
1
4EAT Transmission Case Bolts
M12 x 1.5
Torque Specification
37.5 ft-lbs (50.8 N·m)
Important Notes
Estimated value based on industry standards.
2 4EAT Transmission Valve Body Bolts
M10 x 1.25
2
4EAT Transmission Valve Body Bolts
M10 x 1.25
Torque Specification
11 ft-lbs (14.9 N·m)
Important Notes
Estimated value based on industry standards.
Transmission Filter and Cooler Lines
1 4EAT Transmission Filter Bolts
M10 x 1.25
1
4EAT Transmission Filter Bolts
M10 x 1.25
Torque Specification
11 ft-lbs (14.9 N·m)
Important Notes
Estimated value based on industry standards.
2 4EAT Transmission Cooler Line Fittings
M12 x 1.5
2
4EAT Transmission Cooler Line Fittings
M12 x 1.5
Torque Specification
17.5 ft-lbs (23.7 N·m)
Important Notes
Estimated value based on industry standards.
Body
Torque specifications for Body
Body
Torque specifications for Body
Suspension And Steering
1 Wheel Lug Nuts
M12 x 1.5
1
Wheel Lug Nuts
M12 x 1.5
Torque Specification
70 ft-lbs (95 N·m)
Important Notes
Ensures wheels remain securely attached during operation. Critical for safety.
2 Strut/Shock Absorber Mounting Bolts
M10 x 1.25
2
Strut/Shock Absorber Mounting Bolts
M10 x 1.25
Torque Specification
60 ft-lbs (82 N·m)
Important Notes
Ensures stability and proper suspension function.
3 Control Arm Bolts
M10 x 1.25
3
Control Arm Bolts
M10 x 1.25
Torque Specification
60 ft-lbs (82 N·m)
Important Notes
Ensures alignment and stability of the suspension system.
4 Ball Joint Nut
M8 x 1.0
4
Ball Joint Nut
M8 x 1.0
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Ensures proper steering and suspension function.
5 Tie Rod End Nut
M6 x 1.0
5
Tie Rod End Nut
M6 x 1.0
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Ensures precise steering control and alignment.
6 Sway Bar Link Nut
M5 x 0.8
6
Sway Bar Link Nut
M5 x 0.8
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Ensures stability during cornering and reduces body roll.
7 Steering Gear/Rack Bolts
M10 x 1.25
7
Steering Gear/Rack Bolts
M10 x 1.25
Torque Specification
55 ft-lbs (75 N·m)
Important Notes
Ensures precise steering control and alignment.
Fuel And Electrical
1 Fuel Tank Strap Bolts
M6 x 1.0
1
Fuel Tank Strap Bolts
M6 x 1.0
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Ensures the fuel tank remains securely mounted, preventing leaks or detachment.
2 Fuel Filler Neck Bolts
M4 x 0.7
2
Fuel Filler Neck Bolts
M4 x 0.7
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Ensures a secure connection and prevents fuel leaks.
3 Battery Terminal Nuts
M4 x 0.7
3
Battery Terminal Nuts
M4 x 0.7
Torque Specification
6 ft-lbs (8 N·m)
Important Notes
Ensures a reliable electrical connection and prevents corrosion or loose connections.
Body Panels And Interior
1 Body Panel Bolts (e.g., fender, door hinges, hood hinges)
M5 x 0.8
1
Body Panel Bolts (e.g., fender, door hinges, hood hinges)
M5 x 0.8
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Ensures panels remain securely attached and aligned, preventing rattles or misalignment.
2 Seat Belt Anchorage Bolts
M8 x 1.0
2
Seat Belt Anchorage Bolts
M8 x 1.0
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Critical for passenger safety, ensuring the seat belts function correctly in the event of a collision.
3 Bumper Mounting Bolts
M6 x 1.0
3
Bumper Mounting Bolts
M6 x 1.0
Torque Specification
20 ft-lbs (27 N·m)
Important Notes
Ensures the bumper remains securely attached and aligned, providing protection in the event of a collision.
4 Roof Rack Mounting Bolts
M5 x 0.8
4
Roof Rack Mounting Bolts
M5 x 0.8
Torque Specification
17 ft-lbs (23 N·m)
Important Notes
Ensures the roof rack remains securely attached, preventing damage or detachment during use.
Brakes
Torque specifications for Brakes
Brakes
Torque specifications for Brakes
Brake Caliper
1 Brake Caliper Bolts
M10 x 1.25
1
Brake Caliper Bolts
M10 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Torque value is estimated based on typical M10 bolt specifications for brake calipers.
2 Brake Caliper Mounting Bracket Bolts
M12 x 1.5
2
Brake Caliper Mounting Bracket Bolts
M12 x 1.5
Torque Specification
55 ft-lbs (75 N·m)
Important Notes
Torque value is estimated based on typical M12 bolt specifications for mounting brackets.
Brake Disc Drum
1 Brake Disc/Drum Retaining Bolts
M10 x 1.25
1
Brake Disc/Drum Retaining Bolts
M10 x 1.25
Torque Specification
53 ft-lbs (72 N·m)
Important Notes
Torque value is estimated based on typical M10 bolt specifications for brake discs/drums.
Wheel Attachment
1 Wheel Lug Nuts
M12 x 1.5
1
Wheel Lug Nuts
M12 x 1.5
Torque Specification
65 ft-lbs (88 N·m)
Important Notes
Torque value is estimated based on typical M12 bolt specifications for wheel lug nuts.
Brake Pedal
1 Brake Pedal Mounting Bolts
M8 x 1.25
1
Brake Pedal Mounting Bolts
M8 x 1.25
Torque Specification
30 ft-lbs (41 N·m)
Important Notes
Torque value is estimated based on typical M8 bolt specifications for brake pedal assemblies.
Brake Hydraulics
1 Brake Line Fittings
M10 x 1.0
1
Brake Line Fittings
M10 x 1.0
Torque Specification
15 ft-lbs (20 N·m)
Important Notes
Torque value is estimated based on typical M10 brake line fitting specifications.
2 Brake Master Cylinder Mounting Bolts
M8 x 1.25
2
Brake Master Cylinder Mounting Bolts
M8 x 1.25
Torque Specification
25 ft-lbs (34 N·m)
Important Notes
Torque value is estimated based on typical M8 bolt specifications for master cylinders.
3 Brake Booster Mounting Bolts
M10 x 1.25
3
Brake Booster Mounting Bolts
M10 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Torque value is estimated based on typical M10 bolt specifications for brake boosters.
Drivetrain
Torque specifications for Drivetrain
Drivetrain
Torque specifications for Drivetrain
Flywheel
1 Flywheel Bolts
M10 x 1.25
1
Flywheel Bolts
M10 x 1.25
Torque Specification
61.5 ft-lbs (83 N·m)
Important Notes
Torque value is an average of the provided range (58-65 ft-lbs / 78-88 Nm).
Transmission Mounting
1 Transmission Mounting Bolts
M10 x 1.5
1
Transmission Mounting Bolts
M10 x 1.5
Torque Specification
50.5 ft-lbs (69 N·m)
Important Notes
Torque value is an average of the provided range (47-54 ft-lbs / 64-74 Nm).
Drive Axle
1 Drive Axle/Half Shaft Bolts
M10 x 1.25
1
Drive Axle/Half Shaft Bolts
M10 x 1.25
Torque Specification
50.5 ft-lbs (69 N·m)
Important Notes
Torque value is an average of the provided range (47-54 ft-lbs / 64-74 Nm).
2 CV Joint/Axle Nut
M24 x 1.5
2
CV Joint/Axle Nut
M24 x 1.5
Torque Specification
144.5 ft-lbs (196 N·m)
Important Notes
Torque value is an average of the provided range (137-152 ft-lbs / 186-206 Nm).
Propeller Shaft
1 Propeller/Drive Shaft Bolts
M8 x 1.25
1
Propeller/Drive Shaft Bolts
M8 x 1.25
Torque Specification
16 ft-lbs (22 N·m)
Important Notes
Torque value is an average of the provided range (15-17 ft-lbs / 20-23 Nm).
Fluid System
1 Transmission Drain and Fill Plugs
M12 x 1.5
1
Transmission Drain and Fill Plugs
M12 x 1.5
Torque Specification
32.5 ft-lbs (44 N·m)
Important Notes
Torque value is an average of the provided range (29-36 ft-lbs / 39-49 Nm).
2 Differential Drain/Fill Plug
M14 x 1.5
2
Differential Drain/Fill Plug
M14 x 1.5
Torque Specification
39.5 ft-lbs (54 N·m)
Important Notes
Torque value is an average of the provided range (36-43 ft-lbs / 49-59 Nm).
3 Transfer Case Drain/Fill Plug
M12 x 1.5
3
Transfer Case Drain/Fill Plug
M12 x 1.5
Torque Specification
32.5 ft-lbs (44 N·m)
Important Notes
Torque value is an average of the provided range (29-36 ft-lbs / 39-49 Nm).
Differential Mounting
1 Differential Mounting Bolts
M10 x 1.5
1
Differential Mounting Bolts
M10 x 1.5
Torque Specification
50.5 ft-lbs (69 N·m)
Important Notes
Torque value is an average of the provided range (47-54 ft-lbs / 64-74 Nm).
Transfer Case Mounting
1 Transfer Case Mounting Bolts
M10 x 1.5
1
Transfer Case Mounting Bolts
M10 x 1.5
Torque Specification
50.5 ft-lbs (69 N·m)
Important Notes
Torque value is an average of the provided range (47-54 ft-lbs / 64-74 Nm).
Pinion Flange
1 Rear Differential Pinion Flange Bolts
M12 x 1.75
1
Rear Differential Pinion Flange Bolts
M12 x 1.75
Torque Specification
65 ft-lbs (88 N·m)
Important Notes
Torque value is an average of the provided range (58-72 ft-lbs / 78-98 Nm).
2 Front Differential Pinion Flange Bolts
M12 x 1.75
2
Front Differential Pinion Flange Bolts
M12 x 1.75
Torque Specification
65 ft-lbs (88 N·m)
Important Notes
Torque value is an average of the provided range (58-72 ft-lbs / 78-98 Nm).
Transmission Bellhousing
1 Transmission Bellhousing Bolts
M10 x 1.5
1
Transmission Bellhousing Bolts
M10 x 1.5
Torque Specification
50.5 ft-lbs (69 N·m)
Important Notes
Torque value is an average of the provided range (47-54 ft-lbs / 64-74 Nm).
Electrical
Torque specifications for Electrical
Electrical
Torque specifications for Electrical
Ignition System
1 Ignition Coil Bolt
M6 x 1.0
1
Ignition Coil Bolt
M6 x 1.0
Torque Specification
7 ft-lbs (9.5 N·m)
Important Notes
Torque value is an average estimate based on typical M6 bolts in ignition systems.
Starting System
1 Starter Motor Mounting Bolts
M10 x 1.5
1
Starter Motor Mounting Bolts
M10 x 1.5
Torque Specification
31 ft-lbs (42 N·m)
Important Notes
Torque value is an average estimate based on typical M10 bolts in starter motor applications.
Charging System
1 Alternator Mounting Bolts
M10 x 1.5
1
Alternator Mounting Bolts
M10 x 1.5
Torque Specification
31 ft-lbs (42 N·m)
Important Notes
Torque value is an average estimate based on typical M10 bolts in alternator applications.
Battery System
1 Battery Terminal Nuts
M6 x 1.0
1
Battery Terminal Nuts
M6 x 1.0
Torque Specification
6 ft-lbs (8 N·m)
Important Notes
Torque value is an average estimate based on typical M6 bolts in battery terminal applications.
Grounding System
1 Grounding Point Bolts
M6 x 1.0
1
Grounding Point Bolts
M6 x 1.0
Torque Specification
8.5 ft-lbs (11.5 N·m)
Important Notes
Torque value is an average estimate based on typical M6 bolts in grounding applications.
Engine Management System
1 ECU Mounting Bolts
M6 x 1.0
1
ECU Mounting Bolts
M6 x 1.0
Torque Specification
8.5 ft-lbs (11.5 N·m)
Important Notes
Torque value is an average estimate based on typical M6 bolts in ECU applications.
2 Sensor Mounting Bolts (e.g., Crankshaft Position Sensor)
M6 x 1.0
2
Sensor Mounting Bolts (e.g., Crankshaft Position Sensor)
M6 x 1.0
Torque Specification
8.5 ft-lbs (11.5 N·m)
Important Notes
Torque value is an average estimate based on typical M6 bolts in sensor applications.
Fuse And Relay System
1 Fuse Box Mounting Bolts
M6 x 1.0
1
Fuse Box Mounting Bolts
M6 x 1.0
Torque Specification
6 ft-lbs (8 N·m)
Important Notes
Torque value is an average estimate based on typical M6 bolts in fuse box applications.
Emissions Sensors
Torque specifications for Emissions_sensors
Emissions Sensors
Torque specifications for Emissions_sensors
Egr System
1 EGR Valve Bolts
M8 x 1.25
1
EGR Valve Bolts
M8 x 1.25
Torque Specification
18.5 ft-lbs (25 N·m)
Important Notes
Estimated value based on typical M8 bolt torque for emissions components.
2 EGR Pipe Bolts
M8 x 1.25
2
EGR Pipe Bolts
M8 x 1.25
Torque Specification
18.5 ft-lbs (25 N·m)
Important Notes
Estimated value based on typical M8 bolt torque for emissions components.
Exhaust Manifold System
1 Exhaust Manifold/Headers Bolts
M10 x 1.5
1
Exhaust Manifold/Headers Bolts
M10 x 1.5
Torque Specification
25.5 ft-lbs (35 N·m)
Important Notes
Estimated value based on typical M10 bolt torque for exhaust components.
2 Exhaust Manifold/Headers to Cylinder Head Bolts
M10 x 1.5
2
Exhaust Manifold/Headers to Cylinder Head Bolts
M10 x 1.5
Torque Specification
25.5 ft-lbs (35 N·m)
Important Notes
Estimated value based on typical M10 bolt torque for exhaust components.
Exhaust Pipe System
1 Exhaust Pipe to Exhaust Manifold/Headers Bolts
M10 x 1.5
1
Exhaust Pipe to Exhaust Manifold/Headers Bolts
M10 x 1.5
Torque Specification
25.5 ft-lbs (35 N·m)
Important Notes
Estimated value based on typical M10 bolt torque for exhaust components.
2 Catalytic Converter to Exhaust Pipe Bolts
M10 x 1.5
2
Catalytic Converter to Exhaust Pipe Bolts
M10 x 1.5
Torque Specification
25.5 ft-lbs (35 N·m)
Important Notes
Estimated value based on typical M10 bolt torque for exhaust components.
Oxygen Sensor System
1 Oxygen Sensor (O2 Sensor) Bolts
M10 x 1.5
1
Oxygen Sensor (O2 Sensor) Bolts
M10 x 1.5
Torque Specification
25.5 ft-lbs (35 N·m)
Important Notes
Estimated value based on typical M10 bolt torque for exhaust components.
Air Injection System
1 Air Injection System Bolts
M6 x 1.0
1
Air Injection System Bolts
M6 x 1.0
Torque Specification
14 ft-lbs (19 N·m)
Important Notes
Estimated value based on typical M6 bolt torque for emissions components.
Exhaust
Torque specifications for Exhaust
Exhaust
Torque specifications for Exhaust
Exhaust Manifold Headers
1 Exhaust Manifold/Headers to Cylinder Head Bolts
M10 x 1.25
1
Exhaust Manifold/Headers to Cylinder Head Bolts
M10 x 1.25
Torque Specification
25.5 ft-lbs (35 N·m)
Important Notes
Torque value is an average of the provided range (22-29 ft-lbs).
2 Exhaust Pipe to Exhaust Manifold/Headers Bolts
M10 x 1.25
2
Exhaust Pipe to Exhaust Manifold/Headers Bolts
M10 x 1.25
Torque Specification
25.5 ft-lbs (35 N·m)
Important Notes
Torque value is an average of the provided range (22-29 ft-lbs).
Catalytic Converter
1 Catalytic Converter to Exhaust Pipe Bolts
M10 x 1.25
1
Catalytic Converter to Exhaust Pipe Bolts
M10 x 1.25
Torque Specification
25.5 ft-lbs (35 N·m)
Important Notes
Torque value is an average of the provided range (22-29 ft-lbs).
Muffler
1 Muffler to Exhaust Pipe Bolts
M10 x 1.25
1
Muffler to Exhaust Pipe Bolts
M10 x 1.25
Torque Specification
25.5 ft-lbs (35 N·m)
Important Notes
Torque value is an average of the provided range (22-29 ft-lbs).
Egr Valve
1 EGR Valve Bolts
M8 x 1.25
1
EGR Valve Bolts
M8 x 1.25
Torque Specification
18.5 ft-lbs (25 N·m)
Important Notes
Torque value is an average of the provided range (17-20 ft-lbs).
Heat Shield
1 Exhaust Heat Shield Bolts
M6 x 1.0
1
Exhaust Heat Shield Bolts
M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Torque value is an average of the provided range (7-9 ft-lbs).
Oxygen Sensor
1 Oxygen Sensor (O2 Sensor)
M12 x 1.25
1
Oxygen Sensor (O2 Sensor)
M12 x 1.25
Torque Specification
35 ft-lbs (47 N·m)
Important Notes
Torque value is an average of the provided range (30-40 ft-lbs).
Exhaust Flange
1 Exhaust Flange Bolts (Downpipe to Midpipe)
M10 x 1.25
1
Exhaust Flange Bolts (Downpipe to Midpipe)
M10 x 1.25
Torque Specification
25.5 ft-lbs (35 N·m)
Important Notes
Torque value is an average of the provided range (22-29 ft-lbs).
Exhaust Hanger
1 Exhaust Hanger Bolts
M8 x 1.25
1
Exhaust Hanger Bolts
M8 x 1.25
Torque Specification
16 ft-lbs (22 N·m)
Important Notes
Torque value is an average of the provided range (14-18 ft-lbs).
Fuel
Torque specifications for Fuel
Fuel
Torque specifications for Fuel
Fuel Delivery System
1 Fuel Rail Bolts
M8 x 1.25
1
Fuel Rail Bolts
M8 x 1.25
Torque Specification
14.5 ft-lbs (20 N·m)
Important Notes
Ensures proper fuel delivery and prevents leaks.
2 Fuel Injector Bolts
M6 x 1.0
2
Fuel Injector Bolts
M6 x 1.0
Torque Specification
14 ft-lbs (19 N·m)
Important Notes
Ensures a proper seal and prevents fuel leaks.
3 Fuel Pump Mounting Bolts
M6 x 1.0
3
Fuel Pump Mounting Bolts
M6 x 1.0
Torque Specification
13.5 ft-lbs (18 N·m)
Important Notes
Ensures the fuel pump is securely mounted and prevents leaks.
Fuel Storage System
1 Fuel Tank Strap Bolts
M10 x 1.5
1
Fuel Tank Strap Bolts
M10 x 1.5
Torque Specification
31 ft-lbs (42 N·m)
Important Notes
Ensures the fuel tank is securely mounted and prevents movement or leaks.
2 Fuel Filler Neck Bolts
M6 x 1.0
2
Fuel Filler Neck Bolts
M6 x 1.0
Torque Specification
10 ft-lbs (14 N·m)
Important Notes
Ensures a tight seal and prevents fuel vapor leaks.
Fuel Filtration System
1 Fuel Filter Bolt/Nut
M8 x 1.25
1
Fuel Filter Bolt/Nut
M8 x 1.25
Torque Specification
25.5 ft-lbs (35 N·m)
Important Notes
Ensures the fuel filter is securely mounted and prevents leaks.
Fuel Regulation System
1 Fuel Pressure Regulator Bolts
M6 x 1.0
1
Fuel Pressure Regulator Bolts
M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated value. Ensures the fuel pressure regulator is securely mounted and maintains correct fuel pressure.
2 Fuel Return Line Bolts
M6 x 1.0
2
Fuel Return Line Bolts
M6 x 1.0
Torque Specification
13 ft-lbs (18 N·m)
Important Notes
Estimated value. Ensures a secure connection and prevents fuel leaks.
Fuel Level Monitoring System
1 Fuel Tank Sender Unit Bolts
M6 x 1.0
1
Fuel Tank Sender Unit Bolts
M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated value. Ensures accurate fuel level readings and prevents leaks.
Hvac
Torque specifications for Hvac
Hvac
Torque specifications for Hvac
Ac Compressor
1 A/C Compressor Mounting Bolts
M10 x 1.25
1
A/C Compressor Mounting Bolts
M10 x 1.25
Torque Specification
31 ft-lbs (42 N·m)
Important Notes
Ensure bolts are tightened in a crisscross pattern to evenly distribute load.
Ac Lines
1 A/C Line Fittings
M8 x 1.25
1
A/C Line Fittings
M8 x 1.25
Torque Specification
13 ft-lbs (18 N·m)
Important Notes
Ensure fittings are clean and free of debris before tightening.
Evaporator
1 Evaporator Housing Bolts
M6 x 1.0
1
Evaporator Housing Bolts
M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated value based on similar M6 bolts in HVAC systems.
Blower Motor
1 Blower Motor Mounting Bolts
M6 x 1.0
1
Blower Motor Mounting Bolts
M6 x 1.0
Torque Specification
6 ft-lbs (8 N·m)
Important Notes
Estimated value based on similar M6 bolts in HVAC systems.
Heater Core
1 Heater Core Inlet/Outlet Fittings
M8 x 1.25
1
Heater Core Inlet/Outlet Fittings
M8 x 1.25
Torque Specification
13 ft-lbs (18 N·m)
Important Notes
Ensure fittings are clean and free of debris before tightening.
Condenser
1 Condenser Mounting Bolts
M6 x 1.0
1
Condenser Mounting Bolts
M6 x 1.0
Torque Specification
8 ft-lbs (11 N·m)
Important Notes
Estimated value based on similar M6 bolts in HVAC systems.
Control Panel
1 HVAC Control Panel Mounting Screws
M4 x 0.7
1
HVAC Control Panel Mounting Screws
M4 x 0.7
Torque Specification
3 ft-lbs (4 N·m)
Important Notes
Estimated value based on similar M4 screws in HVAC systems.
Suspension
Torque specifications for Suspension
Suspension
Torque specifications for Suspension
Strut Shock Absorber
1 Strut/Shock Absorber Mounting Bolts
M12 x 1.5
1
Strut/Shock Absorber Mounting Bolts
M12 x 1.5
Torque Specification
59 ft-lbs (80 N·m)
Important Notes
Torque value is the midpoint of the provided range (55-63 ft-lbs / 75-85 Nm).
2 Lower Strut Mount Bolts
M12 x 1.5
2
Lower Strut Mount Bolts
M12 x 1.5
Torque Specification
55 ft-lbs (75 N·m)
Important Notes
Torque value is the midpoint of the provided range (50-60 ft-lbs / 68-81 Nm).
3 Upper Strut Mount Nuts
M10 x 1.25
3
Upper Strut Mount Nuts
M10 x 1.25
Torque Specification
16 ft-lbs (22 N·m)
Important Notes
Torque value is the midpoint of the provided range (14-18 ft-lbs / 19-24 Nm).
Control Arms
1 Control Arm Bolts
M12 x 1.5
1
Control Arm Bolts
M12 x 1.5
Torque Specification
59 ft-lbs (80 N·m)
Important Notes
Torque value is the midpoint of the provided range (55-63 ft-lbs / 75-85 Nm).
2 Ball Joint Nut
M10 x 1.25
2
Ball Joint Nut
M10 x 1.25
Torque Specification
40 ft-lbs (54 N·m)
Important Notes
Torque value is the midpoint of the provided range (36-43 ft-lbs / 49-59 Nm).
Steering System
1 Tie Rod End Nut
M10 x 1.25
1
Tie Rod End Nut
M10 x 1.25
Torque Specification
33 ft-lbs (45 N·m)
Important Notes
Torque value is the midpoint of the provided range (29-36 ft-lbs / 39-49 Nm).
2 Steering Gear/Rack Bolts
M12 x 1.5
2
Steering Gear/Rack Bolts
M12 x 1.5
Torque Specification
53 ft-lbs (72 N·m)
Important Notes
Torque value is the midpoint of the provided range (48-58 ft-lbs / 65-79 Nm).
Sway Bar
1 Sway Bar Link Nut
M8 x 1.25
1
Sway Bar Link Nut
M8 x 1.25
Torque Specification
26 ft-lbs (35 N·m)
Important Notes
Torque value is the midpoint of the provided range (22-29 ft-lbs / 30-40 Nm).
Wheels
1 Wheel Lug Nuts
M12 x 1.5
1
Wheel Lug Nuts
M12 x 1.5
Torque Specification
65 ft-lbs (88 N·m)
Important Notes
Torque value is the midpoint of the provided range (58-72 ft-lbs / 78-98 Nm). Always use a star pattern when tightening lug nuts.
Subframe
1 Subframe Bolts
M14 x 1.5
1
Subframe Bolts
M14 x 1.5
Torque Specification
75 ft-lbs (102 N·m)
Important Notes
Torque value is the midpoint of the provided range (70-80 ft-lbs / 95-108 Nm). Always follow the manufacturer's recommended torque sequence.
Rear Suspension
1 Rear Trailing Arm Bolts
M12 x 1.5
1
Rear Trailing Arm Bolts
M12 x 1.5
Torque Specification
60 ft-lbs (81 N·m)
Important Notes
Torque value is the midpoint of the provided range (55-65 ft-lbs / 75-88 Nm).
2 Rear Lateral Link Bolts
M12 x 1.5
2
Rear Lateral Link Bolts
M12 x 1.5
Torque Specification
55 ft-lbs (75 N·m)
Important Notes
Torque value is the midpoint of the provided range (50-60 ft-lbs / 68-81 Nm).
Troubleshooting Guide
Common issues, diagnostic steps, and prevention guidelines
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Common Issues
Bolt stretching, stripped threads, uneven torque patterns
Loose Components
Symptoms:
- Rattling or vibration noises
- Visible movement in components
- Uneven panel gaps
Solutions:
- Clean threads and mounting surfaces
- Replace damaged fasteners
- Apply proper torque in sequence
- Use thread locker if specified
Stripped Fasteners
Symptoms:
- Unable to achieve proper torque
- Fastener spins freely
- Visible thread damage
Solutions:
- Use thread repair kit if appropriate
- Install thread insert (HeliCoil)
- Replace component if threaded hole is damaged
- Upgrade to higher grade fastener if recommended
Overtightened Components
Symptoms:
- Cracked or deformed parts
- Broken fasteners
- Compressed gaskets or seals
Solutions:
- Replace damaged components
- Use new fasteners
- Follow proper torque sequence
- Verify correct torque specifications
Diagnostic Steps
Visual inspection, torque verification, thread assessment
Diagnostic Steps
Visual inspection, torque verification, thread assessment
1
Visual Inspection
Inspect the affected area for any visible signs of damage or wear
- Check for cracks or deformation
- Look for signs of excessive wear
- Verify proper fastener installation
2
Torque Verification
Verify the torque applied to the fasteners
- Check the torque wrench calibration
- Verify the torque specification
- Compare the applied torque to the specification
3
Thread Assessment
Assess the condition of the threads
- Check for signs of thread damage
- Verify the thread type and size
- Check for proper thread engagement
Prevention Guidelines
Best practices, maintenance tips, tool care
Prevention Guidelines
Best practices, maintenance tips, tool care
Best Practices
- Always follow the recommended torque specification
- Use the correct type and size of fasteners
- Verify the torque wrench calibration regularly
Maintenance Tips
- Regularly inspect the affected area for signs of wear or damage
- Replace damaged or worn-out components promptly
- Keep the work area clean and organized
Tool Care
- Regularly clean and maintain the torque wrench
- Store the torque wrench in a dry and secure location
- Verify the torque wrench calibration before each use
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What IS the recommended torque for the lug nuts on my 1992-2000 Subaru Impreza?
Q1
What IS the recommended torque for the lug nuts on my 1992-2000 Subaru Impreza?
The recommended torque for the lug nuts on a 1992-2000 Subaru Impreza IS 85 ft-lbs.
Q2 What IS the torque spec for the spark plugs in my 1992-2000 Subaru Impreza?
Q2
What IS the torque spec for the spark plugs in my 1992-2000 Subaru Impreza?
The torque spec for the spark plugs in a 1992-2000 Subaru Impreza IS 18 ft-lbs.
Q3 What IS the torque spec for the oil pan drain plug on my 1992-2000 Subaru Impreza?
Q3
What IS the torque spec for the oil pan drain plug on my 1992-2000 Subaru Impreza?
The torque spec for the oil pan drain plug on a 1992-2000 Subaru Impreza IS 22 ft-lbs.
Q4 What type of torque wrench should I use to tighten bolts on my 1992-2000 Subaru Impreza?
Q4
What type of torque wrench should I use to tighten bolts on my 1992-2000 Subaru Impreza?
It IS recommended to use a click-type torque wrench to ensure accurate torque application on your 1992-2000 Subaru Impreza.
Q5 IS it important to follow the specified torque values for my 1992-2000 Subaru Impreza?
Q5
IS it important to follow the specified torque values for my 1992-2000 Subaru Impreza?
Yes, it IS crucial to adhere to the specified torque values for your 1992-2000 Subaru Impreza to prevent damage to components, ensure proper assembly, and maintain vehicle safety.
Q6 Can I use a regular wrench to tighten bolts on my 1992-2000 Subaru Impreza?
Q6
Can I use a regular wrench to tighten bolts on my 1992-2000 Subaru Impreza?
While it IS possible to use a regular wrench, it IS not recommended as it can be difficult to achieve accurate torque values and could lead to over-tightening or under-tightening.
Environmental Considerations
Temperature, humidity, and seasonal effects on torque specifications
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature Effects
Includes: High Heat, Cold Weather, Thermal Cycling
Temperature can significantly impact torque values and fastener behavior
Cold Weather
Effects:
- Increased material brittleness
- Higher torque required due to thread contraction
- Reduced thread lubricant effectiveness
Recommendations:
- Allow components to warm to room temperature when possible
- Consider using winter-grade thread lubricants
- Check torque values more frequently during winter months
Hot Weather
Effects:
- Thermal expansion of components
- Decreased friction in threads
- Accelerated lubricant breakdown
Recommendations:
- Check torque when components are at normal operating temperature
- Use temperature-resistant thread lockers
- Consider re-torquing after heat cycles
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Humidity and Corrosion
Covers: Rust Prevention, Salt Exposure, Moisture Control
Moisture and corrosion can affect fastener integrity and torque values
High Humidity
Effects:
- Accelerated corrosion formation
- Reduced friction coefficient
- Potential thread seizing
Prevention:
- Use corrosion-resistant fasteners
- Apply appropriate anti-seize compounds
- Maintain proper protective coatings
Salt Exposure
Effects:
- Rapid corrosion development
- Thread damage
- Seized fasteners
Prevention:
- Regular underbody washing
- Use of sacrificial anodes where appropriate
- Application of protective coatings
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Seasonal Maintenance
Spring, Summer, Fall, and Winter maintenance schedules
Spring
- Inspect for winter damage
- Clean and protect exposed fasteners
- Check torque on critical components
Summer
- Monitor heat-affected components
- Check expansion-related loosening
- Inspect cooling system mounts
Fall
- Prepare for winter conditions
- Apply corrosion protection
- Verify all fasteners are properly torqued
Winter
- More frequent inspection of critical fasteners
- Check for salt damage
- Monitor suspension component torque
Related Resources
Tools, service procedures, and technical bulletins
Recommended Tools
Digital Torque Wrench (10-100 Nm)
Recommended for precise tightening of fasteners within the specified torque range, ensuring proper assembly and preventing damage.
- Digital display for accurate readings
- Audible signal when target torque IS reached
Service Procedures
Engine Components Torque Specifications
Refer to the following table for tightening torque values for specific engine components.
Suspension and Steering Torque Specifications
Tighten suspension and steering components to the specified torque values for optimal performance and safety.
Brake System Torque Specifications
Ensure the proper functioning and safety of the braking system by following the recommended torque values when tightening its components.
Technical Service Bulletins
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
ASE
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.